Products
Omron CJ1W series input unit PLC programmable controller CJ1W-ID262
A Wide Range of Basic Output Units for High Speed Output and Different Applications
• These Output Units receive the results of output instructions from the CPU Unit and perform ON/OFF control for external devices.
• High-speed Output models CJ1W-ID262 can help to increase system throughput.
Omron input unit module CJ1W-ID232 PLC programming controller module
A Wide Range of Basic Output Units for High Speed Output and Different Applications
• These Output Units receive the results of output instructions from the CPU Unit and perform ON/OFF control for external devices.
• High-speed Output models CJ1W-ID232 can help to increase system throughput.
Omron CJ-series New Controller Link Units CJ1W-CLK21-V1 CJ1W-CLK23
New Controller Link Units, Now with 4,000 Send Words
• The Controller Link is an FA network that can send and receive large amounts of data easily and at high speed.The Controller Link supports data links that enable sharing data between PLCs and computers and a message service that enables sending and receiving data whenever required.
• Systems can be flexibly built by using Repeater Units toenable T-branches, long-distance wiring, and converting part of the network to optical cable.
Omron PLC Programmable Controller Analog Input Units CJ1W-AD041-V1
Analog Input Units
• Input up to eight analog signals with one Unit.
• Functions include line disconnection detection, averaging, peak value holding, offset/gain adjustment, and scaling.
(Offset/gain adjustment is not supported by the CJ1W-AD042. Scaling is supported only by the CJ1W-AD042.)
• High-speed A/D conversion in 20 μs/point with direct conversion function * (CJ1W-AD042 only).
Omron CJ1W Series PLC Module Analog Input Units CJ1W-AD081-V1
Analog Input Units
• Input up to eight analog signals with one Unit.
• Functions include line disconnection detection, averaging, peak value holding, offset/gain adjustment, and scaling.
(Offset/gain adjustment is not supported by the CJ1W-AD042. Scaling is supported only by the CJ1W-AD042.)
• High-speed A/D conversion in 20 μs/point with direct conversion function * (CJ1W-AD042 only).
Omron CJ1W PLC Programmable Controller Analog Input Units CJ1W-AD042
Analog Input Units
• Input up to eight analog signals with one Unit.
• Functions include line disconnection detection, averaging, peak value holding, offset/gain adjustment, and scaling.
(Offset/gain adjustment is not supported by the CJ1W-AD042. Scaling is supported only by the CJ1W-AD042.)
• High-speed A/D conversion in 20 μs/point with direct conversion function * (CJ1W-AD042 only).
Omron CJ1W PLC Programmable Controller Analog Output Units CJ1W-DA08C
Analog Output Units
• Output up to eight analog signals with one Unit.
• Functions include output holding, offset/gain adjustment, and scaling. (Offset/gain adjustment is not supported by the CJ1W-DA042V. Scaling
is supported only by the CJ1W-DA08V/DA08C/DA042V.)
• High-speed D/A conversion in 20 μs/point with direct conversion function * (CJ1W-DA042V only).
Omron CJ1W PLC Programmable Controller Analog Output Units CJ1W-DA08V
Analog Output Units
• Output up to eight analog signals with one Unit.
• Functions include output holding, offset/gain adjustment, and scaling. (Offset/gain adjustment is not supported by the CJ1W-DA042V. Scaling
is supported only by the CJ1W-DA08V/DA08C/DA042V.)
• High-speed D/A conversion in 20 μs/point with direct conversion function * (CJ1W-DA042V only).
Omron CJ1W PLC Programmable Controller Analog Output Units CJ1W-DA041
Analog Output Units
• Output up to eight analog signals with one Unit.
• Functions include output holding, offset/gain adjustment, and scaling. (Offset/gain adjustment is not supported by the CJ1W-DA042V. Scaling
is supported only by the CJ1W-DA08V/DA08C/DA042V.)
• High-speed D/A conversion in 20 μs/point with direct conversion function * (CJ1W-DA042V only).
Omron CJ1W Series PLC Module Analog Output Units CJ1W-DA021
Analog Output Units
• Output up to eight analog signals with one Unit.
• Functions include output holding, offset/gain adjustment, and scaling. (Offset/gain adjustment is not supported by the CJ1W-DA042V. Scaling
is supported only by the CJ1W-DA08V/DA08C/DA042V.)
• High-speed D/A conversion in 20 μs/point with direct conversion function * (CJ1W-DA042V only).
Omron CJ1W PLC Programmable Controller Analog Output Units CJ1W-DA042V
Analog Output Units
• Output up to eight analog signals with one Unit.
• Functions include output holding, offset/gain adjustment, and scaling. (Offset/gain adjustment is not supported by the CJ1W-DA042V. Scaling
is supported only by the CJ1W-DA08V/DA08C/DA042V.)
• High-speed D/A conversion in 20 μs/point with direct conversion function * (CJ1W-DA042V only).
Omron CJ1W PLC Programmable Controller Analog I/O Units CJ1W-MAD42
Analog I/O Units
• Input up to four analog signals and output up to two analog signals with one Unit.
• Functions include line disconnection detection, input averaging, scaling, input peak value holding, output holding, ratio conversion, and offset/
gain adjustment.
*Direct Conversion Instructions for High-speed type can be used to create a consistent response time from input through data processing and
output. With the Machine Automation Controller NJ-series, the direct conversion function cannot be used. This function is supported only by the
CJ-series CPU Unit.